Torrent details for "Udemy NREL Phase VI Wind Turbine CFD Analysis and Validation" Log in to bookmark
Controls:
×
Report Torrent
Please select a reason for reporting this torrent:
Your report will be reviewed by our moderation team.
×
Report Information
Loading report information...
This torrent has been reported 0 times.
Report Summary:
| User | Reason | Date |
|---|
Failed to load report information.
×
Success
Your report has been submitted successfully.
Checked by:
Category:
Language:
English
Total Size:
3.3 GB
Info Hash:
2EC64C4B0A2E898E87E8424E1717A2B229599029
Added By:
Added:
Oct. 23, 2023, 11:42 p.m.
Stats:
|
(Last updated: May 16, 2025, 6:44 a.m.)
| File | Size |
|---|---|
| Get Bonus Downloads Here.url | 182 bytes |
| 1. Introduction to course.mp4 | 27.8 MB |
| 1. Introduction to course.srt | 5.7 KB |
| 1.1 Martin O. L. Hansen - Aerodynamics of Wind Turbines (2008, Earthscan).pdf | 3.3 MB |
| 1.2 NREL Phase VI_CFD.pdf | 5.5 MB |
| 1.3 NRELPHASEVI.xlsx | 52.0 KB |
| 1.4 Reneable Energy.pdf | 1.6 MB |
| 2. Brief overview of course.mp4 | 45.9 MB |
| 2. Brief overview of course.srt | 5.8 KB |
| 3. Problem Description.mp4 | 133.7 MB |
| 3. Problem Description.srt | 18.6 KB |
| 4. Data extraction from graph.mp4 | 23.6 MB |
| 4. Data extraction from graph.srt | 3.5 KB |
| S809_Airfoil.txt | 1.3 KB |
| S809_practice.txt | 1.3 KB |
| s809.xlsx | 18.6 KB |
| 1. S809 airfoil coordinates.mp4 | 22.6 MB |
| 1. S809 airfoil coordinates.srt | 3.1 KB |
| 10. Creating transition and base support for NREL Phase VI wind turbine blade.mp4 | 104.7 MB |
| 10. Creating transition and base support for NREL Phase VI wind turbine blade.srt | 12.5 KB |
| 2. Understating flow angles in wind turbine.mp4 | 95.4 MB |
| 2. Understating flow angles in wind turbine.srt | 20.8 KB |
| 3. Importing S809 coordinates into Solidworks 2020.mp4 | 66.6 MB |
| 3. Importing S809 coordinates into Solidworks 2020.srt | 11.4 KB |
| 4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.mp4 | 50.4 MB |
| 4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.srt | 8.6 KB |
| 5. Creating point at 30% chord length for defining rotation axis.mp4 | 37.6 MB |
| 5. Creating point at 30% chord length for defining rotation axis.srt | 6.2 KB |
| 6. Creating square trailing edge.mp4 | 22.5 MB |
| 6. Creating square trailing edge.srt | 3.9 KB |
| 7. Creating 21 plans at given radial locations for the blade section.mp4 | 56.9 MB |
| 7. Creating 21 plans at given radial locations for the blade section.srt | 6.5 KB |
| 8. Creating 21 airfoils on 21 plans with given twist angle and chord length.mp4 | 58.1 MB |
| 8. Creating 21 airfoils on 21 plans with given twist angle and chord length.srt | 9.3 KB |
| 9. Creating blade section from 21 section using Loft command in Solidworks.mp4 | 40.5 MB |
| 9. Creating blade section from 21 section using Loft command in Solidworks.srt | 5.8 KB |
| NREL Phase VI_bluentTE_finalmodel.SLDPRT | 626.0 KB |
| NREL Phase VI_bluentTE_step1.SLDPRT | 118.3 KB |
| NREL Phase VI_bluentTE_step2.SLDPRT | 146.9 KB |
| NREL Phase VI_bluentTE_step3.SLDPRT | 211.3 KB |
| NREL Phase VI_bluentTE_step4.SLDPRT | 193.2 KB |
| NREL Phase VI_bluentTE_step5.SLDPRT | 189.5 KB |
| NREL Phase VI_bluentTE_step6.SLDPRT | 476.4 KB |
| NREL Phase VI_bluentTE_step7.SLDPRT | 510.3 KB |
| S809_Airfoil.txt | 1.3 KB |
| S809_practice.txt | 1.3 KB |
| s809.xlsx | 18.6 KB |
| 1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.mp4 | 20.8 MB |
| 1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.srt | 3.6 KB |
| 10. Making a symmetric model of full wind turbine.mp4 | 25.5 MB |
| 10. Making a symmetric model of full wind turbine.srt | 6.3 KB |
| 2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.mp4 | 57.9 MB |
| 2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.srt | 12.1 KB |
| 3. Creating assembly of full wind turbine including hub.mp4 | 85.8 MB |
| 3. Creating assembly of full wind turbine including hub.srt | 15.2 KB |
| 4. Setting origin on the back side of hub of wind turbine model.mp4 | 24.0 MB |
| 4. Setting origin on the back side of hub of wind turbine model.srt | 5.1 KB |
| 5. Creation of inner domain.mp4 | 53.7 MB |
| 5. Creation of inner domain.srt | 8.9 KB |
| 6. Creation of outer domain.mp4 | 85.9 MB |
| 6. Creation of outer domain.srt | 11.7 KB |
| 7. Named selection for inner and outer domains.mp4 | 28.3 MB |
| 7. Named selection for inner and outer domains.srt | 7.0 KB |
| 8. Changing display properties and colors of geometry in spaceclaim.mp4 | 45.6 MB |
| 8. Changing display properties and colors of geometry in spaceclaim.srt | 8.8 KB |
| 9. Making surfaces from solid body.mp4 | 7.2 MB |
| 9. Making surfaces from solid body.srt | 1.7 KB |
| NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg.scdoc | 243.7 KB |
| NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg_twobladeshub.scdoc | 459.4 KB |
| NREL Phase VI_inner.scdoc | 461.7 KB |
| NREL Phase VI_outer_Domain1.scdoc | 42.0 KB |
| NREL Phase VI_outer_Domain2.scdoc | 40.4 KB |
| NREL Phase VI_outer_Domain3.scdoc | 38.5 KB |
| inner.scdoc | 1.2 MB |
| outer.scdoc | 217.0 KB |
| 1. Introduction.mp4 | 36.7 MB |
| 1. Introduction.srt | 8.1 KB |
| 10. Defining mesh sizes on other parts.mp4 | 31.7 MB |
| 10. Defining mesh sizes on other parts.srt | 3.7 KB |
| 11. Setting maximum elements size in Global mesh setup.mp4 | 13.5 MB |
| 11. Setting maximum elements size in Global mesh setup.srt | 2.1 KB |
| 12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.mp4 | 88.1 MB |
| 12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.srt | 13.2 KB |
| 13. Deleting volume mesh (Octree).mp4 | 6.0 MB |
| 13. Deleting volume mesh (Octree).srt | 1.2 KB |
| 14. Smoothing surface mesh to improve mesh quality.mp4 | 9.9 MB |
| 14. Smoothing surface mesh to improve mesh quality.srt | 1.9 KB |
| 15. Creating volume mesh using Delaunay method.mp4 | 37.2 MB |
| 15. Creating volume mesh using Delaunay method.srt | 5.5 KB |
| 16. Density box for mesh refinement - Introduction to density box creation.mp4 | 58.4 MB |
| 16. Density box for mesh refinement - Introduction to density box creation.srt | 6.0 KB |
| 17. Density box for surface mesh refinement on interface 3.mp4 | 100.7 MB |
| 17. Density box for surface mesh refinement on interface 3.srt | 13.8 KB |
| 18. Density box Refining Volume mesh in wake region of wind turbine.mp4 | 62.1 MB |
| 18. Density box Refining Volume mesh in wake region of wind turbine.srt | 6.9 KB |
| 19. Mesh types in ICEMCFD and definition of Prism meshing.mp4 | 20.2 MB |
| 19. Mesh types in ICEMCFD and definition of Prism meshing.srt | 6.1 KB |
| 2. Importing geometry of inner domain into ICEMCFD.mp4 | 22.0 MB |
| 2. Importing geometry of inner domain into ICEMCFD.srt | 4.7 KB |
| 20. Creating Prism Meshing on wind turbine blade.mp4 | 180.0 MB |
| 20. Creating Prism Meshing on wind turbine blade.srt | 19.6 KB |
| 21. Adjusting Prism meshing.mp4 | 49.5 MB |
| 21. Adjusting Prism meshing.srt | 6.0 KB |
| 22. Setting up boundary conditions and mesh export.mp4 | 36.2 MB |
| 22. Setting up boundary conditions and mesh export.srt | 5.8 KB |
| 23. Checking mesh quality in Fluent.mp4 | 57.6 MB |
| 23. Checking mesh quality in Fluent.srt | 8.2 KB |
| 3. Display properties of model.mp4 | 51.3 MB |
| 3. Display properties of model.srt | 7.5 KB |
| 4. Creating part names in ICEMCFD.mp4 | 38.4 MB |
| 4. Creating part names in ICEMCFD.srt | 8.0 KB |
| 5. Creating material point for model in ICEMCFD.mp4 | 23.1 MB |
| 5. Creating material point for model in ICEMCFD.srt | 4.8 KB |
| 6. Geometry file in ICEMCFD - tin file.mp4 | 17.5 MB |
| 6. Geometry file in ICEMCFD - tin file.srt | 2.3 KB |
| 7. Topo tolerance settings and build topology for wind turbine geometry.mp4 | 149.1 MB |
| 7. Topo tolerance settings and build topology for wind turbine geometry.srt | 21.8 KB |
| 8. Tri tolerance for geometry.mp4 | 27.8 MB |
| 8. Tri tolerance for geometry.srt | 3.6 KB |
| 9. Defining mesh sizes on leading and trailing edges.mp4 | 82.3 MB |
| 9. Defining mesh sizes on leading and trailing edges.srt | 11.0 KB |
| Inner.atr | 2.3 KB |
| Inner.fbc | 696 bytes |
| Inner.fbc_old | 624 bytes |
| Inner.prj | 9.1 KB |
| Inner.tin | 934.2 KB |
| Inner.uns | 11.9 MB |
| Inner.uns.bak | 11.9 MB |
| Outer.atr | 1.9 KB |
| Outer.fbc | 540 bytes |
| Outer.fbc_old | 454 bytes |
| Outer.prj | 9.2 KB |
| Outer.tin | 31.6 KB |
| Outer.uns | 28.3 MB |
| Outer.uns.bak | 28.3 MB |
| points.atr | 299 bytes |
| points.fbc | 161 bytes |
| points.fbc_old | 159 bytes |
| points.prj | 7.4 KB |
| points.tin | 2.4 KB |
| 1. Introduction.mp4 | 14.2 MB |
| 1. Introduction.srt | 1.7 KB |
| 2. Creating volume mesh using octree mesh with density box 1 for surface mesh.mp4 | 66.7 MB |
| 2. Creating volume mesh using octree mesh with density box 1 for surface mesh.srt | 11.1 KB |
| 3. Deleting volume mesh and smoothing surface mesh.mp4 | 9.3 MB |
| 3. Deleting volume mesh and smoothing surface mesh.srt | 1.4 KB |
| 4. Creating density box 2 for mesh refinement in wake region.mp4 | 42.8 MB |
| 4. Creating density box 2 for mesh refinement in wake region.srt | 8.2 KB |
| 5. Maximum element size in domain.mp4 | 15.8 MB |
| 5. Maximum element size in domain.srt | 2.7 KB |
| 6. Adjusting density boxes and creating volume mesh using Delaunay method.mp4 | 98.9 MB |
| 6. Adjusting density boxes and creating volume mesh using Delaunay method.srt | 8.7 KB |
| 7. Exporting mesh.mp4 | 28.7 MB |
| 7. Exporting mesh.srt | 3.2 KB |
| 8. Mesh quality.mp4 | 18.5 MB |
| 8. Mesh quality.srt | 1.7 KB |
| 1. Introduction.mp4 | 61.6 MB |
| 1. Introduction.srt | 9.9 KB |
| 1.1 Fluent Case and Data files (google drive link-Public link).html | 143 bytes |
| 10. Comparing CFD and Experimental data.mp4 | 61.8 MB |
| 10. Comparing CFD and Experimental data.srt | 7.3 KB |
| 11. Results at wind speed = 10 ms.mp4 | 98.1 MB |
| 11. Results at wind speed = 10 ms.srt | 11.0 KB |
| 2. Importing inner and outer domain grids into single core Fluent.mp4 | 41.4 MB |
| 2. Importing inner and outer domain grids into single core Fluent.srt | 6.4 KB |
| 3. Mesh Display.mp4 | 96.3 MB |
| 3. Mesh Display.srt | 13.5 KB |
| 4. Mesh quality and mesh info of NREL Phase VI wind turbine.mp4 | 21.2 MB |
| 4. Mesh quality and mesh info of NREL Phase VI wind turbine.srt | 4.0 KB |
| 5. Mesh partitioning into 4 partitions and reading case file into Parallel Fluent.mp4 | 29.7 MB |
| 5. Mesh partitioning into 4 partitions and reading case file into Parallel Fluent.srt | 4.6 KB |
| 6. Setting up turbulence model, cell zone conditions and boundary conditions.mp4 | 34.0 MB |
| 6. Setting up turbulence model, cell zone conditions and boundary conditions.srt | 6.0 KB |
| 7. Creating mesh interfaces between inner and outer domains.mp4 | 16.2 MB |
| 7. Creating mesh interfaces between inner and outer domains.srt | 2.6 KB |
| 8. Solver Settings and solution running.mp4 | 73.6 MB |
| 8. Solver Settings and solution running.srt | 11.7 KB |
| 9. Contour and other plots for NREL Phase VI wind turbine.mp4 | 51.8 MB |
| 9. Contour and other plots for NREL Phase VI wind turbine.srt | 6.8 KB |
| Bonus Resources.txt | 386 bytes |
Name
DL
Uploader
Size
S/L
Added
NOTE
SOURCE: Udemy NREL Phase VI Wind Turbine CFD Analysis and Validation
-----------------------------------------------------------------------------------
COVER
-----------------------------------------------------------------------------------
MEDIAINFO
None
×