Torrent details for "Udemy Geometric Dimensioning and Tolerancing GD T Basics" Log in to bookmark
Controls:
×
Report Torrent
Please select a reason for reporting this torrent:
Your report will be reviewed by our moderation team.
×
Report Information
Loading report information...
This torrent has been reported 0 times.
Report Summary:
| User | Reason | Date |
|---|
Failed to load report information.
×
Success
Your report has been submitted successfully.
Checked by:
Category:
Language:
English
Total Size:
1.8 GB
Info Hash:
8CB28B2FF708FDE70761591CE22935DDCD46E2D6
Added By:
Added:
Oct. 24, 2023, 4:19 p.m.
Stats:
|
(Last updated: May 15, 2025, 3:26 p.m.)
| File | Size |
|---|---|
| Get Bonus Downloads Here.url | 182 bytes |
| 001 Introduction.mp4 | 68.3 MB |
| 001 Introduction_en.srt | 2.9 KB |
| 001 Introduction_en.vtt | 2.6 KB |
| 002 My Learning journey and a Learning guide to GD&T.mp4 | 27.6 MB |
| 002 My Learning journey and a Learning guide to GD&T_en.srt | 16.9 KB |
| 002 My Learning journey and a Learning guide to GD&T_en.vtt | 14.9 KB |
| 003 Importance of Engineering Drawing.mp4 | 10.3 MB |
| 003 Importance of Engineering Drawing_en.srt | 2.7 KB |
| 003 Importance of Engineering Drawing_en.vtt | 2.4 KB |
| 004 The Three Major stakeholders.mp4 | 7.4 MB |
| 004 The Three Major stakeholders_en.srt | 1.8 KB |
| 004 The Three Major stakeholders_en.vtt | 1.7 KB |
| 005 Quality of Drawing.mp4 | 5.8 MB |
| 005 Quality of Drawing_en.srt | 1.5 KB |
| 005 Quality of Drawing_en.vtt | 1.4 KB |
| 006 Cost Of Drawing Error.mp4 | 11.5 MB |
| 006 Cost Of Drawing Error_en.srt | 2.8 KB |
| 006 Cost Of Drawing Error_en.vtt | 2.5 KB |
| 007 Examples of Drawing error.mp4 | 8.3 MB |
| 007 Examples of Drawing error_en.srt | 3.9 KB |
| 007 Examples of Drawing error_en.vtt | 3.4 KB |
| 008 3D Model to 2D representation.mp4 | 5.7 MB |
| 008 3D Model to 2D representation_en.srt | 1.8 KB |
| 008 3D Model to 2D representation_en.vtt | 1.6 KB |
| 009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection.mp4 | 25.3 MB |
| 009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection_en.srt | 13.1 KB |
| 009 Orthographic Projection of 3D into 2D and 1st angle and 3rd angle projection_en.vtt | 11.5 KB |
| 010 What is Dimensioning_.mp4 | 7.0 MB |
| 010 What is Dimensioning__en.srt | 2.2 KB |
| 010 What is Dimensioning__en.vtt | 2.0 KB |
| 011 Concept of Tolerance.mp4 | 16.7 MB |
| 011 Concept of Tolerance_en.srt | 3.4 KB |
| 011 Concept of Tolerance_en.vtt | 3.1 KB |
| 012 Ways of representing tolerance.mp4 | 5.9 MB |
| 012 Ways of representing tolerance_en.srt | 2.2 KB |
| 012 Ways of representing tolerance_en.vtt | 1.9 KB |
| 013 Fits in Mechanical Assemblies.mp4 | 4.7 MB |
| 013 Fits in Mechanical Assemblies_en.srt | 1.2 KB |
| 013 Fits in Mechanical Assemblies_en.vtt | 1.1 KB |
| 014 Types of Fits and Selection.mp4 | 29.2 MB |
| 014 Types of Fits and Selection_en.srt | 6.3 KB |
| 014 Types of Fits and Selection_en.vtt | 5.6 KB |
| 015 Examples of types of fits.mp4 | 7.5 MB |
| 015 Examples of types of fits_en.srt | 5.0 KB |
| 015 Examples of types of fits_en.vtt | 4.4 KB |
| 016 How is Tolerance decided_.mp4 | 38.8 MB |
| 016 How is Tolerance decided__en.srt | 17.4 KB |
| 016 How is Tolerance decided__en.vtt | 15.4 KB |
| 017 Drawing with Tolerances.mp4 | 15.0 MB |
| 017 Drawing with Tolerances_en.srt | 3.9 KB |
| 017 Drawing with Tolerances_en.vtt | 3.5 KB |
| 018 Engineering Drawing Template.mp4 | 17.1 MB |
| 018 Engineering Drawing Template_en.srt | 3.1 KB |
| 018 Engineering Drawing Template_en.vtt | 2.7 KB |
| 019 Examples of Engineering drawings.mp4 | 6.3 MB |
| 019 Examples of Engineering drawings_en.srt | 3.1 KB |
| 019 Examples of Engineering drawings_en.vtt | 2.7 KB |
| 020 Need from the Drawing.mp4 | 23.2 MB |
| 020 Need from the Drawing_en.srt | 5.3 KB |
| 020 Need from the Drawing_en.vtt | 4.7 KB |
| 021 What is a Feature_.mp4 | 8.4 MB |
| 021 What is a Feature__en.srt | 1.9 KB |
| 021 What is a Feature__en.vtt | 1.7 KB |
| 022 Examples on Features and non features.mp4 | 9.0 MB |
| 022 Examples on Features and non features_en.srt | 4.4 KB |
| 022 Examples on Features and non features_en.vtt | 3.9 KB |
| 023 Dimension types on drawings.mp4 | 10.0 MB |
| 023 Dimension types on drawings_en.srt | 6.3 KB |
| 023 Dimension types on drawings_en.vtt | 5.5 KB |
| 024 How is Inspection of parts done_.mp4 | 37.5 MB |
| 024 How is Inspection of parts done__en.srt | 5.8 KB |
| 024 How is Inspection of parts done__en.vtt | 5.1 KB |
| 025 Examples of inspection of a part.mp4 | 21.0 MB |
| 025 Examples of inspection of a part_en.srt | 11.2 KB |
| 025 Examples of inspection of a part_en.vtt | 9.9 KB |
| 026 CMM inspection.mp4 | 7.4 MB |
| 026 CMM inspection_en.srt | 2.8 KB |
| 026 CMM inspection_en.vtt | 2.5 KB |
| 001 Tolerancing a pin with a gauge hole.mp4 | 24.8 MB |
| 001 Tolerancing a pin with a gauge hole_en.srt | 15.1 KB |
| 001 Tolerancing a pin with a gauge hole_en.vtt | 13.2 KB |
| 002 Issue with Traditional tolerancing - No Relative control of features.mp4 | 9.5 MB |
| 002 Issue with Traditional tolerancing - No Relative control of features_en.srt | 2.6 KB |
| 002 Issue with Traditional tolerancing - No Relative control of features_en.vtt | 2.3 KB |
| 003 Issue with Traditional tolerancing - Ambiguity in Inspection.mp4 | 12.2 MB |
| 003 Issue with Traditional tolerancing - Ambiguity in Inspection_en.srt | 3.3 KB |
| 003 Issue with Traditional tolerancing - Ambiguity in Inspection_en.vtt | 2.9 KB |
| 004 Issue with Traditional tolerancing - No Assembly consideration.mp4 | 10.7 MB |
| 004 Issue with Traditional tolerancing - No Assembly consideration_en.srt | 1.8 KB |
| 004 Issue with Traditional tolerancing - No Assembly consideration_en.vtt | 1.6 KB |
| 005 Issue with Traditional tolerancing - No control of Profiles.mp4 | 11.2 MB |
| 005 Issue with Traditional tolerancing - No control of Profiles_en.srt | 2.8 KB |
| 005 Issue with Traditional tolerancing - No control of Profiles_en.vtt | 2.5 KB |
| 006 Why GD&T is needed_.mp4 | 20.5 MB |
| 006 Why GD&T is needed__en.srt | 4.3 KB |
| 006 Why GD&T is needed__en.vtt | 3.9 KB |
| 007 Example of Parallel faces.mp4 | 7.5 MB |
| 007 Example of Parallel faces_en.srt | 4.8 KB |
| 007 Example of Parallel faces_en.vtt | 4.3 KB |
| 008 T slots example.mp4 | 7.6 MB |
| 008 T slots example_en.srt | 5.0 KB |
| 008 T slots example_en.vtt | 4.4 KB |
| 009 Poppet of Valve example.mp4 | 6.0 MB |
| 009 Poppet of Valve example_en.srt | 3.9 KB |
| 009 Poppet of Valve example_en.vtt | 3.4 KB |
| 010 When to use Co ordinate tolerancing and when not.html | 141 bytes |
| 001 Origins of GD&T.mp4 | 11.3 MB |
| 001 Origins of GD&T_en.srt | 2.1 KB |
| 001 Origins of GD&T_en.vtt | 1.9 KB |
| 002 Size, Form, Orientation and Location.mp4 | 19.7 MB |
| 002 Size, Form, Orientation and Location_en.srt | 5.9 KB |
| 002 Size, Form, Orientation and Location_en.vtt | 5.2 KB |
| 003 What is GD&T _ What are the important concepts_.mp4 | 10.4 MB |
| 003 What is GD&T _ What are the important concepts__en.srt | 2.9 KB |
| 003 What is GD&T _ What are the important concepts__en.vtt | 2.6 KB |
| 004 The Feature control Frame.mp4 | 26.6 MB |
| 004 The Feature control Frame_en.srt | 4.1 KB |
| 004 The Feature control Frame_en.vtt | 3.6 KB |
| 005 Basic Dimensions.mp4 | 12.8 MB |
| 005 Basic Dimensions_en.srt | 2.3 KB |
| 005 Basic Dimensions_en.vtt | 2.1 KB |
| 006 Common Drafting Errors- Basic dimensions and Feature control frame.mp4 | 6.1 MB |
| 006 Common Drafting Errors- Basic dimensions and Feature control frame_en.srt | 4.5 KB |
| 006 Common Drafting Errors- Basic dimensions and Feature control frame_en.vtt | 3.9 KB |
| 007 Feature of Size.mp4 | 14.9 MB |
| 007 Feature of Size_en.srt | 2.6 KB |
| 007 Feature of Size_en.vtt | 2.3 KB |
| 008 Identifying Feature of Size.mp4 | 16.2 MB |
| 008 Identifying Feature of Size_en.srt | 3.5 KB |
| 008 Identifying Feature of Size_en.vtt | 3.1 KB |
| 009 Identifying Feature of size Example 2.mp4 | 5.6 MB |
| 009 Identifying Feature of size Example 2_en.srt | 3.2 KB |
| 009 Identifying Feature of size Example 2_en.vtt | 2.8 KB |
| 010 Irregular Features of Size and comparison.mp4 | 11.7 MB |
| 010 Irregular Features of Size and comparison_en.srt | 8.9 KB |
| 010 Irregular Features of Size and comparison_en.vtt | 7.9 KB |
| 011 Comparison between GD&t and non GD&T.mp4 | 6.7 MB |
| 011 Comparison between GD&t and non GD&T_en.srt | 3.9 KB |
| 011 Comparison between GD&t and non GD&T_en.vtt | 3.5 KB |
| 012 Material Conditions.mp4 | 9.2 MB |
| 012 Material Conditions_en.srt | 2.5 KB |
| 012 Material Conditions_en.vtt | 2.2 KB |
| 013 Rule 1.mp4 | 27.1 MB |
| 013 Rule 1_en.srt | 4.6 KB |
| 013 Rule 1_en.vtt | 4.1 KB |
| 014 Rule 1 Examples and Over riding Rule 1.mp4 | 8.6 MB |
| 014 Rule 1 Examples and Over riding Rule 1_en.srt | 5.6 KB |
| 014 Rule 1 Examples and Over riding Rule 1_en.vtt | 5.0 KB |
| 015 Need for Reference.mp4 | 16.4 MB |
| 015 Need for Reference_en.srt | 2.4 KB |
| 015 Need for Reference_en.vtt | 2.1 KB |
| 001 Datums _ Introduction.mp4 | 4.9 MB |
| 001 Datums _ Introduction_en.srt | 1.4 KB |
| 001 Datums _ Introduction_en.vtt | 1.2 KB |
| 002 How Datums are Created.mp4 | 31.6 MB |
| 002 How Datums are Created_en.srt | 6.2 KB |
| 002 How Datums are Created_en.vtt | 5.5 KB |
| 003 Datum and Datum Feature , Terminology.mp4 | 10.3 MB |
| 003 Datum and Datum Feature , Terminology_en.srt | 2.9 KB |
| 003 Datum and Datum Feature , Terminology_en.vtt | 2.6 KB |
| 004 Datum Reference Frame.mp4 | 11.5 MB |
| 004 Datum Reference Frame_en.srt | 2.5 KB |
| 004 Datum Reference Frame_en.vtt | 2.2 KB |
| 005 Datum reference frame CAD demonstration.mp4 | 8.7 MB |
| 005 Datum reference frame CAD demonstration_en.srt | 4.9 KB |
| 005 Datum reference frame CAD demonstration_en.vtt | 4.3 KB |
| 006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature.mp4 | 16.5 MB |
| 006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature_en.srt | 3.0 KB |
| 006 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature_en.vtt | 2.7 KB |
| 007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD.mp4 | 6.4 MB |
| 007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD_en.srt | 1.8 KB |
| 007 Datum Reference frame - 2 Cylindrical feature and 1 Planar feature CAD_en.vtt | 1.6 KB |
| 008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature.mp4 | 16.7 MB |
| 008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature_en.srt | 3.1 KB |
| 008 Datum Reference Frame - 1 Cylindrical and 2 Planar feature_en.vtt | 2.8 KB |
| 009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD.mp4 | 7.0 MB |
| 009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD_en.srt | 2.3 KB |
| 009 Datum Reference Frame - 1 Cylindrical and 2 Planar feature CAD_en.vtt | 2.0 KB |
| 010 Selection of Datums.mp4 | 19.5 MB |
| 010 Selection of Datums_en.srt | 5.0 KB |
| 010 Selection of Datums_en.vtt | 4.4 KB |
| 011 Simple Process of Applying Datums.mp4 | 8.0 MB |
| 011 Simple Process of Applying Datums_en.srt | 2.9 KB |
| 011 Simple Process of Applying Datums_en.vtt | 2.6 KB |
| 012 Examples of Datum Scheme selection.mp4 | 17.2 MB |
| 012 Examples of Datum Scheme selection_en.srt | 9.0 KB |
| 012 Examples of Datum Scheme selection_en.vtt | 7.9 KB |
| 013 Exercise in selection and sequencing of datums.mp4 | 8.9 MB |
| 013 Exercise in selection and sequencing of datums_en.srt | 4.0 KB |
| 013 Exercise in selection and sequencing of datums_en.vtt | 3.5 KB |
| 014 Tolerance Zone.mp4 | 8.3 MB |
| 014 Tolerance Zone_en.srt | 2.8 KB |
| 014 Tolerance Zone_en.vtt | 2.5 KB |
| 015 How GD&T Helps Inspection_.mp4 | 10.7 MB |
| 015 How GD&T Helps Inspection__en.srt | 2.4 KB |
| 015 How GD&T Helps Inspection__en.vtt | 2.1 KB |
| 016 Tolerance zone Comparison for Position control of Hole.mp4 | 14.9 MB |
| 016 Tolerance zone Comparison for Position control of Hole_en.srt | 3.2 KB |
| 016 Tolerance zone Comparison for Position control of Hole_en.vtt | 2.8 KB |
| 017 Comparison Summary.mp4 | 5.8 MB |
| 017 Comparison Summary_en.srt | 1.7 KB |
| 017 Comparison Summary_en.vtt | 1.5 KB |
| 018 Inspection Requirements.mp4 | 9.6 MB |
| 018 Inspection Requirements_en.srt | 2.5 KB |
| 018 Inspection Requirements_en.vtt | 2.2 KB |
| 36642420-EXERCISE-TRAINGLE-BRACKET.pdf | 11.3 KB |
| 001 Material Modifiers on Geometric tolerance.mp4 | 17.6 MB |
| 001 Material Modifiers on Geometric tolerance_en.srt | 3.6 KB |
| 001 Material Modifiers on Geometric tolerance_en.vtt | 3.2 KB |
| 002 Rule #2.mp4 | 15.3 MB |
| 002 Rule #2_en.srt | 6.8 KB |
| 002 Rule #2_en.vtt | 6.0 KB |
| 003 Material Modifiers Example.mp4 | 19.2 MB |
| 003 Material Modifiers Example_en.srt | 3.4 KB |
| 003 Material Modifiers Example_en.vtt | 3.0 KB |
| 004 Shaft Position Tolerance Brief.mp4 | 1.9 MB |
| 004 Shaft Position Tolerance Brief_en.srt | 1.5 KB |
| 004 Shaft Position Tolerance Brief_en.vtt | 1.3 KB |
| 005 Bonus Tolerance calculation- Shaft.mp4 | 20.9 MB |
| 005 Bonus Tolerance calculation- Shaft_en.srt | 4.2 KB |
| 005 Bonus Tolerance calculation- Shaft_en.vtt | 3.7 KB |
| 006 Hole position tolerance.mp4 | 6.9 MB |
| 006 Hole position tolerance_en.srt | 1.7 KB |
| 006 Hole position tolerance_en.vtt | 1.5 KB |
| 007 Bonus tolerance Hole.mp4 | 11.2 MB |
| 007 Bonus tolerance Hole_en.srt | 2.3 KB |
| 007 Bonus tolerance Hole_en.vtt | 2.0 KB |
| 008 Virtual Condition of Shaft.mp4 | 11.5 MB |
| 008 Virtual Condition of Shaft_en.srt | 2.8 KB |
| 008 Virtual Condition of Shaft_en.vtt | 2.5 KB |
| 009 Virtual Condition of Hole.mp4 | 9.3 MB |
| 009 Virtual Condition of Hole_en.srt | 2.7 KB |
| 009 Virtual Condition of Hole_en.vtt | 2.4 KB |
| 010 Condition for Successful Assembly.mp4 | 7.6 MB |
| 010 Condition for Successful Assembly_en.srt | 1.1 KB |
| 010 Condition for Successful Assembly_en.vtt | 981 bytes |
| 011 Functional Gauging using Virtual condition.mp4 | 10.0 MB |
| 011 Functional Gauging using Virtual condition_en.srt | 1.8 KB |
| 011 Functional Gauging using Virtual condition_en.vtt | 1.7 KB |
| 012 Internal and External Boundaries.mp4 | 6.6 MB |
| 012 Internal and External Boundaries_en.srt | 1.0 KB |
| 012 Internal and External Boundaries_en.vtt | 947 bytes |
| 013 Resultant Condition External Feature of Size at MMC.mp4 | 22.8 MB |
| 013 Resultant Condition External Feature of Size at MMC_en.srt | 3.1 KB |
| 013 Resultant Condition External Feature of Size at MMC_en.vtt | 2.7 KB |
| 014 Resultant Condition Internal Feature of Size at MMC.mp4 | 15.1 MB |
| 014 Resultant Condition Internal Feature of Size at MMC_en.srt | 2.5 KB |
| 014 Resultant Condition Internal Feature of Size at MMC_en.vtt | 2.2 KB |
| 015 Bonus Tolerances study for LMC modifier.mp4 | 10.8 MB |
| 015 Bonus Tolerances study for LMC modifier_en.srt | 7.1 KB |
| 015 Bonus Tolerances study for LMC modifier_en.vtt | 6.3 KB |
| 016 Resultant and Virtual conditions for LMC and Summary.mp4 | 29.5 MB |
| 016 Resultant and Virtual conditions for LMC and Summary_en.srt | 4.2 KB |
| 016 Resultant and Virtual conditions for LMC and Summary_en.vtt | 10.0 KB |
| 017 Example with LMC modifier and calculating minimum wall thickness.mp4 | 12.2 MB |
| 017 Example with LMC modifier and calculating minimum wall thickness_en.srt | 6.4 KB |
| 017 Example with LMC modifier and calculating minimum wall thickness_en.vtt | 5.7 KB |
| 018 Example 2 with LMC modifier and calculating minimum wall thickness.mp4 | 7.7 MB |
| 018 Example 2 with LMC modifier and calculating minimum wall thickness_en.srt | 4.8 KB |
| 018 Example 2 with LMC modifier and calculating minimum wall thickness_en.vtt | 4.2 KB |
| 019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise.mp4 | 26.9 MB |
| 019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise_en.srt | 2.8 KB |
| 019 Tolerance Calculations for manufactured part - RFS vs LMC vs MMC with exercise_en.vtt | 13.7 KB |
| 020 Actual Mating Envelope.mp4 | 19.6 MB |
| 020 Actual Mating Envelope_en.srt | 4.5 KB |
| 020 Actual Mating Envelope_en.vtt | 4.0 KB |
| 001 Introduction to Planar Straightness and its inspection.mp4 | 22.2 MB |
| 001 Introduction to Planar Straightness and its inspection_en.srt | 3.9 KB |
| 001 Introduction to Planar Straightness and its inspection_en.vtt | 3.5 KB |
| 002 Straightness of Cylindrical surface.mp4 | 24.1 MB |
| 002 Straightness of Cylindrical surface_en.srt | 3.3 KB |
| 002 Straightness of Cylindrical surface_en.vtt | 2.9 KB |
| 003 Straightness of Axis and comparison.mp4 | 27.0 MB |
| 003 Straightness of Axis and comparison_en.srt | 4.6 KB |
| 003 Straightness of Axis and comparison_en.vtt | 4.1 KB |
| 004 Inspection of Axis straightness.mp4 | 15.4 MB |
| 004 Inspection of Axis straightness_en.srt | 2.9 KB |
| 004 Inspection of Axis straightness_en.vtt | 2.5 KB |
| 005 Material modifier in Axis straightness.mp4 | 12.4 MB |
| 005 Material modifier in Axis straightness_en.srt | 3.1 KB |
| 005 Material modifier in Axis straightness_en.vtt | 2.7 KB |
| 006 Inspecting Axis straightness with modifier using Functional Gauge.mp4 | 7.4 MB |
| 006 Inspecting Axis straightness with modifier using Functional Gauge_en.srt | 2.4 KB |
| 006 Inspecting Axis straightness with modifier using Functional Gauge_en.vtt | 2.1 KB |
| 007 Inspecting Axis straightness.mp4 | 6.6 MB |
| 007 Inspecting Axis straightness_en.srt | 2.0 KB |
| 007 Inspecting Axis straightness_en.vtt | 1.8 KB |
| 008 Applications of Straightness control.mp4 | 9.7 MB |
| 008 Applications of Straightness control_en.srt | 2.5 KB |
| 008 Applications of Straightness control_en.vtt | 2.2 KB |
| 009 Straightness applied differently in two directions.mp4 | 5.5 MB |
| 009 Straightness applied differently in two directions_en.srt | 1.8 KB |
| 009 Straightness applied differently in two directions_en.vtt | 1.6 KB |
| 010 Flatness and its Inspection.mp4 | 18.5 MB |
| 010 Flatness and its Inspection_en.srt | 4.8 KB |
| 010 Flatness and its Inspection_en.vtt | 4.2 KB |
| 011 How Flatness saves money.mp4 | 7.6 MB |
| 011 How Flatness saves money_en.srt | 2.0 KB |
| 011 How Flatness saves money_en.vtt | 1.8 KB |
| 012 Rule 1 and Flatness.mp4 | 3.4 MB |
| 012 Rule 1 and Flatness_en.srt | 1.2 KB |
| 012 Rule 1 and Flatness_en.vtt | 1.0 KB |
| 013 Summary of Flatness control.mp4 | 13.5 MB |
| 013 Summary of Flatness control_en.srt | 2.9 KB |
| 013 Summary of Flatness control_en.vtt | 2.5 KB |
| 014 Circularity.mp4 | 13.3 MB |
| 014 Circularity_en.srt | 2.8 KB |
| 014 Circularity_en.vtt | 2.5 KB |
| 015 Inspecting Circularity.mp4 | 11.8 MB |
| 015 Inspecting Circularity_en.srt | 2.0 KB |
| 015 Inspecting Circularity_en.vtt | 1.8 KB |
| 016 Cylindricity.mp4 | 8.2 MB |
| 016 Cylindricity_en.srt | 2.1 KB |
| 016 Cylindricity_en.vtt | 1.8 KB |
| 017 Inspecting Cylindricity.mp4 | 9.9 MB |
| 017 Inspecting Cylindricity_en.srt | 1.6 KB |
| 017 Inspecting Cylindricity_en.vtt | 1.4 KB |
| 018 Points on cylindricity and circularity.mp4 | 8.2 MB |
| 018 Points on cylindricity and circularity_en.srt | 2.2 KB |
| 018 Points on cylindricity and circularity_en.vtt | 1.9 KB |
| 019 Difference between Surface straightness control and cylindricity.mp4 | 8.1 MB |
| 019 Difference between Surface straightness control and cylindricity_en.srt | 2.2 KB |
| 019 Difference between Surface straightness control and cylindricity_en.vtt | 1.9 KB |
| 001 Angularity control.mp4 | 9.1 MB |
| 001 Angularity control_en.srt | 2.3 KB |
| 001 Angularity control_en.vtt | 2.0 KB |
| 002 Angularity Inspection.mp4 | 13.4 MB |
| 002 Angularity Inspection_en.srt | 2.4 KB |
| 002 Angularity Inspection_en.vtt | 2.1 KB |
| 003 Perpendicularity.mp4 | 6.4 MB |
| 003 Perpendicularity_en.srt | 1.5 KB |
| 003 Perpendicularity_en.vtt | 1.3 KB |
| 004 Inspecting Perpendicularity.mp4 | 16.0 MB |
| 004 Inspecting Perpendicularity_en.srt | 2.7 KB |
| 004 Inspecting Perpendicularity_en.vtt | 2.5 KB |
| 005 Perpendicularity of Feature of size.mp4 | 15.0 MB |
| 005 Perpendicularity of Feature of size_en.srt | 2.9 KB |
| 005 Perpendicularity of Feature of size_en.vtt | 2.6 KB |
| 006 Parallelism.mp4 | 5.6 MB |
| 006 Parallelism_en.srt | 1.6 KB |
| 006 Parallelism_en.vtt | 1.4 KB |
| 007 Inspection of Parallelism.mp4 | 9.2 MB |
| 007 Inspection of Parallelism_en.srt | 1.3 KB |
| 007 Inspection of Parallelism_en.vtt | 1.2 KB |
| 001 Position Control and its Inspection.mp4 | 22.1 MB |
| 001 Position Control and its Inspection_en.srt | 4.3 KB |
| 001 Position Control and its Inspection_en.vtt | 3.8 KB |
| 002 Comparison between Perpendicularity and position.mp4 | 10.4 MB |
| 002 Comparison between Perpendicularity and position_en.srt | 2.9 KB |
| 002 Comparison between Perpendicularity and position_en.vtt | 2.6 KB |
| 003 Concentricity.mp4 | 7.0 MB |
| 003 Concentricity_en.srt | 1.9 KB |
| 003 Concentricity_en.vtt | 1.7 KB |
| 004 Symmetry.mp4 | 10.4 MB |
| 004 Symmetry_en.srt | 2.7 KB |
| 004 Symmetry_en.vtt | 2.4 KB |
| 005 Example of Orientation + Position control - part 1.mp4 | 18.5 MB |
| 005 Example of Orientation + Position control - part 1_en.srt | 9.5 KB |
| 005 Example of Orientation + Position control - part 1_en.vtt | 8.4 KB |
| 006 Example of Orientation + Position control - part 2.mp4 | 9.7 MB |
| 006 Example of Orientation + Position control - part 2_en.srt | 4.4 KB |
| 006 Example of Orientation + Position control - part 2_en.vtt | 3.9 KB |
| 001 Circular Runout.mp4 | 13.1 MB |
| 001 Circular Runout_en.srt | 2.9 KB |
| 001 Circular Runout_en.vtt | 2.5 KB |
| 002 Circular Runout on Perpendicular Face.mp4 | 13.2 MB |
| 002 Circular Runout on Perpendicular Face_en.srt | 2.5 KB |
| 002 Circular Runout on Perpendicular Face_en.vtt | 2.2 KB |
| 003 Total Runout.mp4 | 9.2 MB |
| 003 Total Runout_en.srt | 2.3 KB |
| 003 Total Runout_en.vtt | 2.0 KB |
| 004 Total Runout on perpendicular face.mp4 | 9.5 MB |
| 004 Total Runout on perpendicular face_en.srt | 2.3 KB |
| 004 Total Runout on perpendicular face_en.vtt | 2.0 KB |
| 005 Applications of Runout.mp4 | 13.0 MB |
| 005 Applications of Runout_en.srt | 3.0 KB |
| 005 Applications of Runout_en.vtt | 2.7 KB |
| 006 Runout controls both Concentricity and Cylindricity.mp4 | 13.5 MB |
| 006 Runout controls both Concentricity and Cylindricity_en.srt | 2.7 KB |
| 006 Runout controls both Concentricity and Cylindricity_en.vtt | 2.4 KB |
| 007 Example of a Wheel rim.html | 370 bytes |
| 001 Profile of a Line.mp4 | 10.0 MB |
| 001 Profile of a Line_en.srt | 2.1 KB |
| 001 Profile of a Line_en.vtt | 1.9 KB |
| 002 Profile of a surface and its Inspection.mp4 | 14.1 MB |
| 002 Profile of a surface and its Inspection_en.srt | 3.7 KB |
| 002 Profile of a surface and its Inspection_en.vtt | 3.3 KB |
| 003 Points on Profile tolerance.mp4 | 3.7 MB |
| 003 Points on Profile tolerance_en.srt | 1.2 KB |
| 003 Points on Profile tolerance_en.vtt | 1.1 KB |
| 004 Profile Control variation with Datums.html | 341 bytes |
| 18480722-PROFILE-CONTROLS-DIFFER.pdf | 426.1 KB |
| 001 Datum Feature Modifier Introduction.mp4 | 9.5 MB |
| 001 Datum Feature Modifier Introduction_en.srt | 2.1 KB |
| 001 Datum Feature Modifier Introduction_en.vtt | 1.9 KB |
| 002 Datum feature modifier Example.mp4 | 21.7 MB |
| 002 Datum feature modifier Example_en.srt | 4.3 KB |
| 002 Datum feature modifier Example_en.vtt | 3.8 KB |
| 003 Datum feature modifier example continued.mp4 | 21.5 MB |
| 003 Datum feature modifier example continued_en.srt | 4.5 KB |
| 003 Datum feature modifier example continued_en.vtt | 4.0 KB |
| 004 Datum Shift Example no.2.mp4 | 17.9 MB |
| 004 Datum Shift Example no.2_en.srt | 4.6 KB |
| 004 Datum Shift Example no.2_en.vtt | 4.1 KB |
| 005 Datum reference frame is fixed.mp4 | 7.7 MB |
| 005 Datum reference frame is fixed_en.srt | 1.9 KB |
| 005 Datum reference frame is fixed_en.vtt | 1.7 KB |
| 006 Benefits of Datum shift.mp4 | 5.8 MB |
| 006 Benefits of Datum shift_en.srt | 1.5 KB |
| 006 Benefits of Datum shift_en.vtt | 1.3 KB |
| 007 It is not Bonus tolerance.mp4 | 4.5 MB |
| 007 It is not Bonus tolerance_en.srt | 1.2 KB |
| 007 It is not Bonus tolerance_en.vtt | 1.1 KB |
| 008 More Examples.html | 203 bytes |
| 18480442-DATUM-SHIFT-examples.pdf | 522.9 KB |
| 001 TASK 1 - create drawing as per instructions.html | 496 bytes |
| 002 TASK 2 _ Write the statement in words for feature control frame.html | 265 bytes |
| 003 TASK 3 _ Create Drawing.html | 125 bytes |
| 004 TASK 4 _ More Drawings of real parts for Interpretation.html | 103 bytes |
| 18477580-TASK-1-KEY.jpg | 45.8 KB |
| 18477604-TASK-2.jpg | 101.9 KB |
| 18477664-TASK-3-KEY.jpg | 62.0 KB |
| 18477684-TASK-3-DRAWING-FOR-WORK.pdf | 8.0 KB |
| 18477742-TASK-4-DRAWINGS.pdf | 268.0 KB |
| 001 Bonus Lecture - More courses to explore engineering.html | 2.9 KB |
| external-assets-links.txt | 1.2 KB |
| Bonus Resources.txt | 357 bytes |
Name
DL
Uploader
Size
S/L
Added
-
510.6 MB
[10
/
4]
2023-10-24
| Uploaded by freecoursewb | Size 510.6 MB | Health [ 10 /4 ] | Added 2023-10-24 |
-
303.8 MB
[5
/
3]
2023-10-22
| Uploaded by freecoursewb | Size 303.8 MB | Health [ 5 /3 ] | Added 2023-10-22 |
-
1005.1 MB
[9
/
5]
2023-10-28
| Uploaded by freecoursewb | Size 1005.1 MB | Health [ 9 /5 ] | Added 2023-10-28 |
-
996.7 MB
[1
/
3]
2023-10-28
| Uploaded by freecoursewb | Size 996.7 MB | Health [ 1 /3 ] | Added 2023-10-28 |
-
1.3 GB
[13
/
21]
2023-10-26
| Uploaded by freecoursewb | Size 1.3 GB | Health [ 13 /21 ] | Added 2023-10-26 |
-
909.8 MB
[13
/
5]
2023-06-01
| Uploaded by freecoursewb | Size 909.8 MB | Health [ 13 /5 ] | Added 2023-06-01 |
-
1.2 GB
[38
/
50]
2023-10-28
| Uploaded by freecoursewb | Size 1.2 GB | Health [ 38 /50 ] | Added 2023-10-28 |
NOTE
SOURCE: Udemy Geometric Dimensioning and Tolerancing GD T Basics
-----------------------------------------------------------------------------------
COVER
-----------------------------------------------------------------------------------
MEDIAINFO
None
×